B150pro | Brewtools
Brewtools
All-In-One brewing system built for the enthusiasts.
Kundrecensioner
Help others choose right. Be the first to write a review!
Write a review, click HERE!Brewtools | B150pro
- 170-liter (44 gal) tank volume and 35 kg (77 lb) malt capacity.
- 6.6kW heating power (2x3.3kW) utilizing two mains inputs.
- High accuracy with 2 digital sensors.
- Conical bottom with center draining for fast and easy cleaning.
- Powerful control system with 7" touch-screen, Wifi and Bluetooth 4.2.
The B150pro has an 150 liter (40 gal) boil capacity and about 35 kg (77 lb) malt capacity. It is equipped with a powerful pump, which can be controlled from the touch-screen. The wort is circulated up through the center-pipe and the pump is fitted using Tri-Clamps making it very easy to remove, even when the tank is full.
The malt pipe has latches that folds out when you hoist it to secure it for draining. To lift the malt pipe on this system you require a lifting system. This is being developed with a custom brewing table and will be ready early 2020.
Sparging is done without tubes or pipes outside the tank. A sparge tube installed on the outside of the centerpipe follows the malt pipe when lifted also lifting the wort spreading device. This makes it very easy to sparge from a separate tank without making a mess.
After brewing with the B150pro, cleaning is fast and easy. The centerpipe is removed easily, and you can easily clean the unit, and all the trub will be drained directly to a bucket or the drains. Use the included circulation device as a CIP solution to save time and cleaning chemicals.
The system has two digital temperature sensors - one in the bottom of the tank and one before the pump. The maxium static offset is ±0,5°C. The sensors can be individually calibrated for maximum accuracy. They have an accuracy of 0.1°C. It's also possible to connect a third sensor (accessory) to monitor the temperature of the wort returning from the counterflow cooler, so you can pump directly to the fermenter when the temperature is right.
All ports are 34mm Tri-Clamp fittings for maximum flexibility without leaks. As standard the system is shipped with one 3-way valve. All silicone tubes are 16x25mm food grade silicone.
The control system is custom developed and features high quality electronics. The software is constantly being improved with new features. It is updated via WiFi.
INCLUDED:
- Complete brewing system with controller, pump, tank sensor, heaters and lid
- Malt pipe with handle and latches
- 1 pcs expanded metal filter
- 1 pcs 3-way valve
- Temperature sensor with adapter for pump line
- 5 pcs 34mm Tri Clamps with gaskets (all used for standard setup)
- 3 pcs 34mm TC blind caps
- 1 pcs dip tube, short type
- 1 pcs mash hat for spreading the wort
- 1 pcs sparge tube
- 150cm 16x25mm silicone tube
- 1 pcs 34mm TC to 19mm hose barb adapter
- O-rings for the center pipe and dip tube
- Power Cables, 2 meter
Cooling not included!
See specification for more info.
For more accessories see here: Accessories Brewtools
*We only have 1 in stock at a time of this product as it is very bulky. If you need more than we have in stock or if it is temporarily out of stock, we ask you to send an email to: order@maltmagnus.se and let us know how many you need and we will make sure to aquire as you desire.
Power | 230 V, 6600 W (2x3300W) - Two individual circuits |
Connection | WiFi 802.11 b/g/n, Bluetooth 4.2, MicroSD |
Width | Without Ball-Valve: 72 cm | With One Ball-Valve: 82 cm | With Two Ball-Valve: 92 cm |
Height | 79 cm |
Height | Tank Height: 60 cm |
Depth | 72 cm |
Diameter | Tank Diameter: 60 cm |
More info | Control Unit: ARM Cortex M4 180mhz, 7" touch-screen |
More info | Pump: 24 V borstlös | Max: 25 l/min, stainless steel outlet, steglös styrning via huvudpanel. |
Accessories | Tubes: 19 x 25 mm silicone - Food Grade |
Weight | 22 kg |
Volume | Total Volume: 169 liter | Malt Pipe Volume: 108 liter | Max boil volume: 150 liter |
Volume | Minimum Liquid Volume: 35 L |
Malt | Max: 35 kg |
Material | 1 mm stainless steel 304 |
Be first to write a review about this product!
Your review:
Common questions
Q: Can I buy directly from you at a store?
A: We´re solely an e-commerce shop but you can chose to pick up your order at our storage. If you´re curious about a specific product or if you want a tour of MM, please contact veronica@maltmagnus.se to book a time or to get more info. Our staff are homebrewers themselfs and use the products in our sortiment.
Q: How fast can I get an answer?
A: Fast! We have our phone hours workdays between 07.00-15.00 Phone: +4619-18 97 90. You can send us an e-mail to info@maltmagnus.se. You can also DM us at our Social Media to get a quick response: Facebook or Instagram.
Q: When are my order delivered?
A: We usually ship an order within 1-2 business days from our warehouse. If you are in a hurry, choose MM-Express at checkout, then we will send you your order on the same business day if you have placed your order before 10 a clock CET. We ship our goods with Bring where the shipping time is usually expected to take between 1-2 business days, depending on the options + your order's delivery terms.
Brewtools is a brand owned by Apparatus AS, a product design company. The company vision is 'Sustainable Innovation', and we work hard to make sure the Brewtools product line reflects this vision of quality and smart solutions.
We believe in thinking outside the box and finding clever ways of doing things, together with our customers. We believe we actually can build great products in Norway - with our own hands - and still make the business sustainable. We believe that you, our customers and friends, deserves to be heard and that we listen to you..
The Brewtools brand, is a result of years of dedicated work, long nights and many good beers. Our vision is to design and build brewing equipment that brings enthusiasm and love for the beer brewing process. We are dedicated to bringing many great products and accessories to the market in the future, with the help of close cooperation with our followers..
We work with some amazing manufacturers that make the parts we need. Many parts are build by hand, by people that love metalwork, CNC machining, welding and polishing. We love when parts are built to last a lifetime. We assemble and test all of the brewing systems in our own facilities in Grimstad, in the south of Norway. Doing the assembly ourselves is probably not the most cost efficient method, and many has advised against it, but we don’t listen. We love being able to put everything together, test it, pack it and ship it to you, so that you don’t have to worry.
Our control systems will always be a the heart of our products. We have some truly devoted hardware and software engineers helping us build the systems we design to the highest standard, and make them future-proof. We are dedicated to spending a lot of time on making the on-board software just what our users want, before you know you want it. We are also looking forward to making a cloud service that will tie it all together. We believe that we should integrate our systems with the calculation and recipe software you already use, in stead of designing our own.