Brewtools | B80 Pro


All-In-One brewing system built for the enthusiasts.

  • In Stock: 1 st
22 990 kr
{{ price }}
  • Shipping within 1-3 working days
  • Delivery to pickup location or to your door
  • Choose Expressorder in the checkout for extra fast order processing


Help others choose right. Be the first to write a review!

Write a review

Brewtools | B80 Pro

  • 90-liter (23 gal) tank volume and 20kg (44 lb) malt capacity.
  • 30-80 liter (8-21 gal) pre-boil volume for flexibility
  • 6kW heating power (2x3kW) utilizing two mains inputs makes heating and boiling fast.
  • High accuracy with 2 digital sensors.
  • Conical bottom with center draining for fast and easy cleaning.
  • Powerful control system with 7" touch-screen, Wifi and Bluetooth 4.2.

The B80 pro has an 80 liter (21 gal) boil capacity and about 20 kg (44 lb) malt capacity. It is equipped with a powerful pump, which can be controlled from the touch-screen. The wort is circulated up through the center-pipe and the pump is fitted using Tri-Clamps making it very easy to remove, even when the tank is full.

The malt pipe has latches that folds out when you lift it, so you can use both your hands for lifting.

Sparging is done without tubes or pipes outside the tank. A sparge tube installed on the outside of the centerpipe follows the malt pipe when lifted also lifting the wort spreading device. This makes it very easy to sparge from a separate tank without making a mess.

After brewing with the B80pro, you never have to turn it upside down for cleaning. The centerpipe is removed easily, and you can easily clean the unit, and all the trub will be drained directly to a bucket or the drains. Use the included circulation device as a CIP solution to save time and cleaning chemicals.

The system has two digital temperature sensors - one in the bottom of the tank and one before the pump. The maxium static offset is ±0.5°C. The sensors can be individually calibrated for maximum accuracy. They have an accuracy of 0.1°C. It's also possible to connect a third sensor (accessory) to monitor the temperature of the wort returning from the counterflow cooler, so you can pump directly to the fermenter when the temperature is right.

With powerful heating elements combining 6kW (230V) of power, heating the water or wort is very fast. During the boil, the PID system is deactivated and you can adjust the power output to achieve the perfect rolling boil. You can also adjust the maximum current of each mains input, to 10, 13, 15 and 16 Amps, to make sure you never blow a fuse.

All ports are 34mm Tri-Clamp fittings for maximum flexibility without leaks. As standard the system is shipped with one 3-way valve. All silicone tubes are 16x25mm food grade silicone.

The control system is custom developed and features high quality electronics. The software is constantly being improved with new features. It is updated via WiFi.


  • Complete brewing system with controller, pump, tank sensor, heaters and lid
  • Malt pipe with handle and latches
  • 1 pcs expanded metal filter
  • 1 pcs 3-way valve
  • Temperature sensor with adapter for pump line
  • 5 pcs 34mm Tri Clamps with gaskets (all used for standard setup)
  • 3 pcs 34mm TC blind caps
  • 1 pcs dip tube, short type
  • 1 pcs mash hat for spreading the wort
  • 1 pcs sparge tube
  • 150cm 16x25mm silicone tube
  • 1 pcs 34mm TC to 19mm hose barb adapter
  • O-rings for the center pipe and dip tube
  • 2 pcs Power Cable, 2 meter

Cooler not included!

See specifications for more info!

Power 230 V, 6000 W (2x3000W) - Two individual circuits
Connection WiFi 802.11 b/g/n, Bluetooth 4.2, MicroSD
Depth 62 cm
Width Without Ball-Valve: 62 cm | With One Ball-Valve: 72 cm | With Two Ball-Valve: 82 cm
Height 67.5 cm
Height Tank Height: 46 cm
Diameter Tank Diameter: 50 cm
Material 1 mm stainless steel 304
More info Control Unit: ARM Cortex M4 180mhz, 7" touch-screen
More info Pump: 24 V borstlös | Max: 25 l/min, stainless steel outlet, steglös styrning via huvudpanel.
Accessories Tubes: 19 x 25 mm silicone - Food Grade
Weight 22 kg
Volume Total Volume: 90 liter | Malt Pipe Volume: 58 liter | Max boil volume: 80 liter
Volume Minimum Liquid Volume: 25 L
Malt Max: 20 kg

Be first to write a review about this product!

Your review:

Common questions

Q: Can I buy directly from you at a store?
A: We´re solely an e-commerce shop but you can chose to pick up your order at our storage. If you´re curious about a specific product or if you want a tour of MM, please contact veronica@maltmagnus.se to book a time or to get more info. Our staff are homebrewers themselfs and use the products in our sortiment. 

Q: How fast can I get an answer?
A: Fast! We have our phone hours workdays between 07.00-15.00 Phone: +4619-18 97 90. You can send us an e-mail to info@maltmagnus.se. You can also DM us at our Social Media to get a quick response: Facebook or Instagram

Q: When are my order delivered?
A: We usually ship an order within 1-2 business days from our warehouse. If you are in a hurry, choose MM-Express at checkout, then we will send you your order on the same business day if you  have placed your order before 10 a clock CET. We ship our goods with Bring where the shipping time is usually expected to take between 1-2 business days, depending on the options + your order's delivery terms.

Brewtools is a brand owned by Apparatus AS, a product design company. The company vision is 'Sustainable Innovation', and we work hard to make sure the Brewtools product line reflects this vision of quality and smart solutions.

We believe in thinking outside the box and finding clever ways of doing things, together with our customers. We believe we actually can build great products in Norway - with our own hands - and still make the business sustainable. We believe that you, our customers and friends, deserves to be heard and that we listen to you..

The Brewtools brand, is a result of years of dedicated work, long nights and many good beers. Our vision is to design and build brewing equipment that brings enthusiasm and love for the beer brewing process. We are dedicated to bringing many great products and accessories to the market in the future, with the help of close cooperation with our followers..

We work with some amazing manufacturers that make the parts we need. Many parts are build by hand, by people that love metalwork, CNC machining, welding and polishing. We love when parts are built to last a lifetime. We assemble and test all of the brewing systems in our own facilities in Grimstad, in the south of Norway. Doing the assembly ourselves is probably not the most cost efficient method, and many has advised against it, but we don’t listen. We love being able to put everything together, test it, pack it and ship it to you, so that you don’t have to worry.

Our control systems will always be a the heart of our products. We have some truly devoted hardware and software engineers helping us build the systems we design to the highest standard, and make them future-proof. We are dedicated to spending a lot of time on making the on-board software just what our users want, before you know you want it. We are also looking forward to making a cloud service that will tie it all together. We believe that we should integrate our systems with the calculation and recipe software you already use, in stead of designing our own.